If your iPhone won’t turn on, don’t worry! In this in-depth guide, we’ll outline some common reasons why your phone might not be working, as well as some tips on how to fix it.
We’ll also cover what to do if your iPhone has been exposed to water damage. So read on for all you need to know about getting your iPhone up and running again!
What to do when iPhone Won’t Turn On?
There are many reasons why your iPhone might not turn on. Maybe the battery is drained, or the charging port is damaged. Here are a few tips on how to fix it:
1. Charge the battery
Your iPhone usually dies because of a low battery. The iPhone can not be turned on if the battery is dead or out of power at all. First, provide a USB cable for you to connect with other charging devices when your iPhone starts to show a warning signal.
Next, Directly plug into computer or laptop by USB port and then press the button which asks “six key” for five seconds in order to complete firmware update operation successfully!
If still don’t work, try removing the case/cover (if have one) and pressing the power button until the camera led flashes; turn it off again after several times tapping fast now.
2. Restart/Reboot your iPhone
If your iPhone isn’t turning on, the first thing you should try is restarting it. This is a simple process that can often fix common issues. To restart your iPhone, hold down the Sleep/Wake button until the recovery mode screen appears. Drag the slider to turn off your phone. Then hold down the Sleep/Wake button again to turn it back on.
3. Try a hard reset of your iPhone
A hard reset of your iPhone might be just what you need to jump-start it and get it working again. This is the last resort step, but if all other methods have failed, it’s worth a try. There are two ways to do a hard reset – through the settings menu or by pressing and holding the power button and home button at the same time.
If your phone is frozen and doesn’t respond to any touch commands, then try using force restart mode. To do this, press and hold both the power button and volume down buttons for about 10 seconds. Hold them until the Apple logo appears on the screen.
4. Check out your charging cable
If you’re using a Dock Connector or Lightning cable to charge your phone, check the following things:
- Check connection points in the charging cable.
- Make sure that both ends of the cable are firmly plugged into a power source and your iPhone.
- If your cable is damaged, try another one. If there is still no change in charging behaviour, it’s possible that either an iOS update on your device has changed how chargers work or third party software may have been installed that could be conflicting with charging features on some devices.
5. Restore iPhone to factory settings with iTunes
If your iPhone is not turning on, or it’s performing abnormally, restoring it to factory settings using iTunes may help.
This will erase all the data and settings, but it may be the best option if you’re experiencing problems with your device. Follow the steps below to restore an iPhone to factory settings using iTunes.
1) Connect your iPhone to your computer and open iTunes.
2) Click on the phone icon in the upper-left corner of the iTunes window.
3) Select “Restore Factory Settings” from the menu that appears.
4) Click “Restore” to confirm that you want to erase all of your data and restore your iPhone to its original state.
5) Wait for iTunes to erase your data and restore your iPhone to its factory settings. This process may take a few minutes.
Once iTunes has finished restoring your iPhone to its factory settings, you can set it up as new or restore it from a backup.
If you’re having problems with your iPhone, restoring it to factory settings is a good place to start troubleshooting.
6. Put iPhone Into DFU Mode
- First, soft Reset your iPhone (reset it by holding the Sleep/Wake and Home button together for a minimum of 10 seconds)
- Put your iPhone into DFU mode. The most important thing is to let go of the buttons at that point, so hold them until they let go on their own if you have time to do so or else make sure not to release them.
You can tell when the phone has been put in DFU mode because you will see an Apple logo with a solid black background before iTunes opens up
- Make sure there isn’t any obstruction between your handset and computer’s USB cable as well
- Enter settings and delete everything that is beginning with “iTunes_Control”
It will ask you for permission to do so and once you’ve given it, the folder will be deleted. If your iPhone still isn’t turning on, try these steps:
- Restart your computer
- Check the USB cable and make sure there are no damages to it
- Update your iTunes software to the latest version
- Restore your iPhone with iTunes by pressing and holding down the Home button and Sleep/Wake button until you see the Apple logo.
After that, release the buttons and wait for your phone to finish restoring. This will erase all of your data so make sure you have a backup!
7. Check your display
Your iPhone displays information on its screen using a technology called LCD (liquid-crystal display).
If your iPhone screen has problems such as not displaying anything at all or just flickering, it’s possible that the LCD panel itself is damaged and will need to be replaced.
8. Reset iPhone Proximity Sensor
If your iPhone still has a black screen, it could be the result of a stuck or malfunctioning proximity sensor.
The proximity sensor is what locks your phone when you’re not using it so that nobody can access data on your screen.
If this is the case then it’s time to reset the iPhone proximity sensor. This can be done by going into Settings > General > Accessibility > Proximity Sensor and tapping Reset Proximity Sensor.
Why won’t my iPhone turn on?
There are many reasons why an iPhone might not turn on. Some of the most common reasons are a low battery, a broken screen, or water damage.
If your iPhone is not turning on, try plugging it into a wall charger and see if that fixes the issue. Here’s a list of reasons why your phone might not be working properly:
1. There’s water damage
2. There’s not enough storage space
3. The phone is overheating
4. The screen is cracked
5. A software glitch is preventing the phone from turning on
6. The iPhone needs a new battery
7. The logic board is defective
Quick tips to protect your iPhone from slowing up
- Delete apps that you don’t use often: This will help free up some space and memory on your iPhone.
- Restart your iPhone: This can help refresh the system and clear out any memory that may be causing issues.
- Update your iOS: Keeping your software up to date can help improve performance and fix any bugs that may be slowing down your phone.
- Reset all settings: If you’ve tried all of the above and your iPhone is still running slow, you can try resetting all settings.
This won’t delete any of your data, but it will reset things like your WiFi passwords and other preferences.
What to do when iPhone won’t turn on due to physical or liquid damage?
If you’ve dropped your iPhone in the sink, toilet, or another body of water, there is a high chance it is no longer working as intended.
An iPhone that has gone through any type of liquid exposure must be shut down and dried out for at least 48 hours following the event before being turned back on to avoid potential damage from internal corrosion.
What If Your iPhone Still Won’t Turn On?
If your iPhone still won’t turn on, the issue might be with the device’s hardware. In this case, you’ll need to take it to the nearest Apple service center or contact Apple support for repair.
Don’t forget to check the status of your iPhone’s warranty as well. If it’s still covered, you might be able to get the issue resolved for free. Otherwise, you’ll likely have to pay for the repairs out of pocket.